- Ivano-Frankivsk, Tysmenytsia district, village Yamnytsia
- Mon - Fri: 08:00 - 17:00 Sat, Sun - closed
Menu
IVANO-FRANKIVSK-DAH LLC is a Ukrainian manufacturer of building materials with a long history and a modern approach to production. The company’s history dates back to the Yamnytsia Cement Plant, where a decision was taken in 1972 to establish a fibre-cement products workshop. By 1975, the company had already produced its first fibre-cement products, marking the start of a new direction in the manufacture of roofing materials.
In the 2000s, the production facilities underwent extensive modernisation: the production lines for fibre-cement sheets were completely overhauled and replaced with state-of-the-art equipment. This led to a significant improvement in product quality, production efficiency and compliance with international standards.
Since 2018, a selected range of corrugated fibre cement sheets has undergone advanced surface treatment, including priming and multilayer coating. These products are sold under the FIBRODAH brand and are supplied not only to the Ukrainian market but also to 10 European countries.
Product quality control is carried out by the company’s own accredited laboratory. The products are also certified by notified bodies of the European Union, confirming their compliance with European quality and safety standards.
Our aim is to create a useful product that meets all quality standards and efficiency requirements. Following this aim IFCEM and FIBRODAH trademark work using European technologies, which helps to automate production processes: from raw material extraction to products shipment
We are focused on stable quality and development. Therefore, we prefer specialists with vast experience and desire for new knowledge. That is why FIBRODAH employees are high-ranking specialists who have access to modern industry methods and regularly receive advanced training.
Ivano-Frankivsk cement plant and created by it FIBRODAH trademark operate according to the international quality management standards ISO 9001:2015. Our IFCEM laboratories, properly accredited, independently test all batches and check its compliance with European quality standards.
Environment is extremely important to us, so we prioritize the justified use of resources. Raw materials are extracted without violating environmental systems, and IFCEM premises are equipped with highly efficient air cleaning equipment that meets European Union standards and requirements.
Production of FIBRODAH fiber cement roof takes place exclusively at
Ivano-Frankivsk-Dah LLC.
Site navigation
Address
Ivano-Frankivsk region, Tysmenytsia district, village Yamnytsia
Work schedule
Mon - Fri: 08:00 - 17:00
Sat, Sun - closed
Акція
Зарядна станція у подарунок за купівлю FIBRODAH
Період проведення акції: 12 березня - 12 грудня 2026 року.
Дякуємо за участь в акції! Результати акції будуть оголошені у наших соціальних мережах — слідкуйте за оновленнями!
Заповни форму нижче та ми передзвонимо
Fill out the form below and we will call you back
Color
Product Сharacteristics
Size, mm
1130х1750
Useful length, mm
1600
Number of bolts / sheet, pcs.
2,2
Thickness, mm
5,8
Usable area, m²
1,68
Number of sheets / m²
0,6
Weight, kg
23
Wave height, mm
40
Sheets area / m²
1,98
Useful width, mm
1050
Number of rails for one sheet, pcs.
2
Number of sheets on the pallet, pcs
107
Accessories
Wind bar (right/left)
1000/800 х 200 mm
Hip detail (Y)
3 х 215 mm
Comb detail (right / left)
КС-1:1130/1050 х 380 mm, КС-2:1130/1050 х 385 mm
Comb cap
left (top)
240 х 405 mm
Comb cap
left (bottom)
245 х 385 mm
Comb cap
right (top)
230 х 400 mm
Comb cap
straight (bottom)
225 х 385 mm
Mounting brackets
М6 х 100 mm
Simplified rib detail
650/570 x 150/200/225 mm, initial
Paint for correction of notches during installation
0,24 kg
1000/800 х 200 мм
3 х 215 mm
1130/1050 х 380/385 mm
240 х 405 mm
245 х 385 mm
230 х 400 mm
225 х 385 mm
100 х 6 mm
650/500 х 150/200/225 mm
240 ml
Color
Product Сharacteristics
Size, mm
1130х1000
Useful length, mm
850
Number of bolts / sheet, pcs.
2,2
Thickness, mm
5,8
Usable area, m²
0,89
Number of sheets / m²
1,2
Weight, kg
13,1
Wave height, mm
40
Sheets area / m²
1,13
Useful width, mm
1050
Number of rails for one sheet, pcs.
1
Number of sheets on the pallet, pcs
107
Accessories
Wind bar (left / right)
1000/800 х 200 mm
Hip detail (Y)
3 х 200 mm
Comb detail (right / left)
КС-1:1130/1050 х 380 mm, КС-2:1130/1050 х 385 mm
Comb cap
left (top)
240 х 405 mm
Comb cap
left (bottom)
245 х 385 mm
Comb cap
right (top)
230 х 400 mm
Comb cap
straight (bottom)
225 х 385 mm
Mounting brackets
М6 х 100 mm
Simplified rib detail
650/570 х 150/200/225 mm
Paint for correction of notches during installation
0,24 kg
1000/800 х 200 mm
3 х 215 mm
1130/1050 х 380/385 mm
240 х 405 mm
245 х 385 mm
230 х 400 mm
225 х 385 mm
100 х 6 mm
650/500 х 150/200/225 mm
240 ml
Color
Product Сharacteristics
Size, mm
1130х585
Useful length, mm
460
Number of bolts / sheet, pcs.
2,2
Thickness, mm
5,8
Usable area, m²
0,48
Number of sheets / m²
2,0
Weight, kg
7,7
Wave height, mm
40
Sheets area / m²
0,66
Useful width, mm
1050
Number of rails for one sheet, pcs.
1
Number of sheets on the pallet, pcs
150
Accessories
Вітрова планки(права/ліва)
1000/800 х 200 mm
Hip detail (Y)
3 х 200 mm
Comb detail (right / left)
КС-1:1130/1050 х 380 mm, КС-2:1130/1050 х 385 mm
Comb cap
left (top)
240 х 405 mm
Comb cap
left (bottom)
245 х 385 mm
Comb cap
right (top)
230 х 400 mm
Comb cap
straight (bottom)
225 х 385 mm
Mounting brackets
М6 х 100 mm
Simplified rib detail
650/570 x 150/200/225 mm, initial
Paint for correction of notches during installation
0,24 kg
1000/800 х 200 mm
3 х 215 mm
1130/1050 х 380/385 mm
240 х 405 mm
245 х 385 mm
230 х 400 mm
225 х 385 mm
100 х 6 mm
650/500 х 150/200/225 мм
240 ml
Please provide complete information on one area and we will show how you can organize it here
Fill out the form below and we will call you back
Fill out the form below and we will call you back
Заповніть форму нижче та отримайте прайс на нашу продукцію
Fill out the form below and get a price for our products
